How it Works
The Oppi operates via a small specially designed 12 volt submersible pump attached to the shower pole and powered by any 12 volt power source, vehicle battery or optional, specially designed Li-Ion rechargeable battery pack. (30 + showers per charge)
The shower comes with a 5 metre long UV protected and weatherproof power cord fitted with a high quality in-line ‘water-proof’ switch and connector plugs.
Now for the best part...
The shower pole is simply placed in a bucket of pre-heated water, attached to and supported by the specially designed shower holding stand which is simply is just pegged into the ground or when used in shower cubicles or solid ground is fitted to the shower base plate as supplied. (see diagram). Alternatively, the shower pole can be connected to most gas powered hot water services, by removing the pump and attaching the hand held shower hose to the bottom of the pole, thus providing a hands free shower for your added convenience.
The shower pole is then adjusted to the required height, power cord is plugged in to power supply and the shower is ready to go. Simply switch on pump using power switch, turn on tap and adjust shower rose as required and enjoy. Again, alternatively once connected to the HWS, simply switch on and control shower operation by using conveniently located tap in the shower rose.
Enjoy a warm, hands free shower!